Easy DIY Christmas Ornaments
This holiday season, Flex Glue has you covered. Here’s an easy DIY Christmas ornament craft for the whole family. Soon you’ll be able to hang your own Flex Seal ornament wherever you wish to spread some Flex Seal Holiday Cheer!
● 1 tube of Flex Glue Clear
● Artificial snowflakes
● 1 piece of wood
● 2 pieces of acrylic
● 1 tassel for hanging the ornament
● Cotton swabs
Get your piece of wood ready. In this case, we chose to use MDF, along with a clear piece of acrylic. As an optional step, you could also have the wood and acrylic engraved with something like Flex On!, Happy Flex-mas! or message of your choice. Once you have all your supplies, use an alcohol wipe to remove any grease, oil, or dirt from the surfaces to be bonded.
Apply a small bead of Flex Glue Clear onto the front side of the precut whiteboard. Make sure glue is spread across entire surface of the whiteboard.
Flex Tip: You may need to use a cotton swab or similar tool to spread the glue evenly.
Press the piece of acrylic that you are using for the front of the ornament onto the front side of the whiteboard. Apply firm and even pressure. Use a cotton swab to remove any excess glue that has squeezed out from the sides.
Once the pieces feel dry to the touch, add a teaspoon of artificial snowflakes onto the surface of the acrylic that is bonded to the whiteboard.
Apply a small amount of Flex Glue Clear to the back part of the whiteboard. Then, use a cotton swab to spread the glue across the entire surface of the back part of the whiteboard.
Press the piece of acrylic that you are using for the back of the ornament onto the back side of the whiteboard. Use a cotton swab to remove any excess that has squeezed out of the sides.
Once completely cured, loop the tassel through the top to finalize your clear ornament craft. Hang your Flex Seal ornament wherever you wish to spread some Flex Seal Holiday Cheer!
Want to See More Ways DIYers Use Flex Seal Products? Read On: