Flex Paste Flood Protection
- $19.99
- $19.99
- Unit price
- per
GET IT FAST! THIS ITEM QUALIFIES FOR EXPEDITED SHIPPING.
The SECUR Low-Level Flood Protection System utilizes Flex Seal Flood products, which are specifically designed to work TOGETHER to create multiple layers of super-strong, waterproof protection, and to be easily removed after floodwaters recede. They can help slow down or even stop low-level water from entering structures.
Flood Paste in a Cartridge is the primary Flood Protection product and should be used as a base coat for your first layer of protection. The cartridge nozzle allows you to target specific areas that need to be sealed. Use on windows, doors, garage doors, and all types of seams, brick moulding, thresholds, conduits, vents and ducts, door hardware (hinges and locks), and more.
Available in a Cartridge and Wrapped Sleeves.
WARNING: California Proposition 65 Notice.
We’re proud to say that when used in combination, and as directed, our Flood Protection Products have been independently verified by UL Solutions to hold back 3ft of water for 14 days on gaps up to ½ inch. Tested in laboratory settings.
Patent Pending for Products and Uses.
DRY TIME
Allow to dry to touch (min 1 hour) before topcoating with other Flood Protection products. Dry time may vary based on temperature, humidity, and thickness of coat.
COVERAGE
Flood Protection Cartridge (9oz): A 1/4" inch bead will cover approximately 21 linear feet.
Flood Protection Cartridge (28oz): A 1/4" inch bead will cover approximately 62 linear feet.
IMPORTANT INFORMATION
Always follow state and local weather advisories and evacuation orders. Depending on age and type of construction, there may be areas that cannot be seen or sealed. Unsealed porous surfaces may seep water during extended underwater exposure. Our Flood Protection Products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building.
ADDITIONAL INFO
All of our Flood Protection products are Patent Pending for both products and uses. Made in the USA with globally sourced materials.
Color of product is high-visibility yellow.
For more information on UL testing, click here.
HOW TO USE FLOOD PASTE
• Protective gloves, clothing, and eyewear are recommended.
• Use only on the exterior structures.
• Make sure the area being sealed is clean, dry, and free of grease, oil, and dirt.
APPLICATION:
• Cut the nub off the Flood Paste.
• Screw on nozzle.
• Cut the nozzle to the desired bead thickness.
• Apply as much Paste as needed to completely fill seams/joints.
• Use a gloved finger or Flex Gap Filler tool to push Flood Paste into seams and onto adjacent surfaces.
• Allow to dry to touch (min 1 hour*) before topcoating with Flood Liquid or Spray.
• Flood Paste begins to cure when exposed to the air.
• Remove any dried material and always use fresh material to seal an opening.
REMOVAL:
Grab a small portion of material from an edge and pull away from structure. Using a small pair of pliers may be necessary. If any residue is left on the surface, use a stiff nylon brush, paper towel or rag with denatured alcohol to clean the area.
*Dry time may vary based on temperature, humidity, and thickness of coat.
