Flex Paste® Flood Protection (Wrapped Sleeve)

Flood Protection Paste in a Wrapped Sleeve should be used on larger areas, flat surfaces, or directly on top of our Flood Tape and in combination with other Flood Protection products.

• It's the same formula as our Paste in a Cartridge, designed to be used with a putty knife to cover a wider area. 

• Ends of packaging can be folded over and twisted to help prevent drying out. 

• Makes resealing of unused product easy for future use.

• Can be used with sausage and bulk caulk gun

• Eco-friendly – less waste than plastic containers.

• Outer box and included tray made of 100% recyclable PET plastic.

For complete instructions, visit flexsealproducts.com/flood.

No water penetration through 1/2 inch gaps at depths up to 3 feet, for 14 days. UL Verified. VerifyUL.com. V114667.

We’re proud to say that when used in combination, and as directed, our Flood Protection Products have been independently verified by UL Solutions to hold back 3ft of water for 14 days on gaps up to ½ inch. Tested in laboratory settings.

Patent Pending for Products and Uses.

Buy more, save more. 5% off orders $500+, 10% off orders $2,500+, 15% off orders $10,000+, 20% off orders $20,000+. Applied at checkout, can not be combined with any other offer.
(3) 8.75oz Sleeves
each
Flood Protection Paste (Wrapped Sleeve)
No items found.

For more information or any questions, call our Customer Service Center at 833-4-A-FLOOD (833-423-5663)

Description
Directions
Videos
FAQs
International

STOP FLOOD WATER™

Our Flood Paste in a Sleeve starts out as a thick, paste that can be pushed deep into all types of openings and hard-to-reach areas. It dries to a strong, flexible, rubberized coating. It seals out water, while remaining completely flexible. Once floodwaters recede, our Flood Paste can be easily removed.

Flood Paste in a Wrapped Sleeve should be used on larger areas, flat surfaces, or directly on top of our other Flood Protection products. Use on basement widows, pet doors, crawlspaces, seams, windowsills, foundation cracks, and more.

When applying our Flood Protection Paste in a Sleeve, it’s important to push the Flood Paste deep into all seams and openings. This will help create a watertight seal. Always be cautious of any sharp objects that may cause injury. flexsealproducts.com/flood.

California Residents: Prop 65 Warning(s)

DRY TIME

Depending on temperature, humidity and thickness of application, Flood Paste will dry to the touch in approximately 2-6 hours, and fully cure in approximately 24-48 hours. Allow product to fully cure before floodwaters arrive. Flood Paste begins to cure when exposed to the air. Remove any dried material and always use fresh material to seal an opening.

COVERAGE

The coverage one coat of the (3) 8.75oz individually wrapped sleeves of Flood Protection Paste, when applied 2 inches wide, is approximately 31 linear feet.

The coverage one coat of the (6) 8.75oz individually wrapped sleeves of Flood Protection Paste, when applied 2 inches wide, is approximately 62 linear feet.

IMPORTANT INFORMATION

Always follow state and local weather advisories and evacuation orders. Depending on age and type of construction, there may be areas that can’t be seen or sealed. Unsealed porous surfaces may seep water during extended underwater exposure. Our Flood Protection Products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building.

ADDITIONAL INFO

All of our Flood Protection Products are Patent Pending for both products and uses.

Made in the USA with globally sourced materials.

Color of product is high-visibility yellow.

For more information on UL testing, click here.

23% savings based on price per ounce, compared to our (3) 8.75 oz option.

For complete instructions go to: flexsealproducts.com/flood

Read entire label for directions and warnings before use.

• Protective gloves, clothing, and eyewear are recommended.

• Apply to the exterior of the structure.

• Area being sealed must be clean, dry, and free of grease, oil, and dirt.

Flood Protection Paste in a Sleeve

• Cut one end of the sleeve and squeeze desired amount into tray provided.

• Use a putty knife, or similar tool, to remove an even layer of material.

• Using a smooth motion, push and spread an even layer directly to the area being sealed.

• All seams, gaps, and openings must be completely sealed.

• Allow 2-6 hours to dry to the touch before applying additional layers.

• Allow 24-48 hours for the final coat of Flood Protection products to fully cure.

• When storing any unused material, fold the emply portion of the sleeve down to the remaining material and secure with a clamp or tie.

REMOVAL

Grab a small portion of material from an edge and pull away from the structure. Using a small pair of pliers may be necessary. If any residue is left on the surface, use a stiff nylon brush, paper towel or rag with denatured alcohol to clean the area.

THIS SECTION ONLY APPLIES TO FLEX FLOOD PROTECTION LINE


General Customer Questions International Distributors International Shipping Support