How To Use Flex Super Glue

Flex Super Glue is a high-performance, instant adhesive that bonds in seconds. It dries crystal clear to form a super strong bond that can be used on almost any material. Flex Super Glue comes in a variety of Liquids, Gels, and sizes. It’s perfect for quick repairs of plastic, metal, ceramic, leather, and more.

How To Use Flex Super Glue

Note: Before using Flex Seal products, read all directions and cautions.

1. Surfaces need to be clean, dry, and free of oil or grease.

2. *Apply 1 drop of glue per square inch.

3. Apply pressure until set (5-45 seconds). Allow up to 1 hour to cure.

Set and cure times vary based on application.

4. Replace cap and store upright in a cool, dry location.

*When using the 3-gram tube (0.1 oz) from the twin-pack (liquid or gel), be sure to unscrew cap and remove foil prior to application.

Tips for Best Results

Flex Super Glue Liquid and Flex Super Glue Gel each have precision nozzles, allowing you to make delicate repairs. The Flex Super Glue Liquid flows like water and is great for horizontal and non-porous surfaces. Flex Super Glue Gel’s thicker formula is great for vertical and porous surfaces. Once fully cured, both formulas have the same high-performance bond.

The Flex Super Glue Brush-On Bottle offers the same clear and long-lasting bonding power – with the only difference being a brush for delicate application, instead of the precision nozzle.

CAUTION: Contains ethyl cyanoacrylate. May be a skin, eye, and respiratory tract irritant. Bonds skin/eyes instantly. When using do not eat, drink, or smoke. Avoid inhalation, ingestion, and eye and skin contact. KEEP OUT OF REACH OF CHILDREN.

First Aid: Do not force skin/eye apart. Rinse with water and call physician or Poison Control Center. In case of emergency call: 1-800-424-9300.

For non-emergencies, refer to our guide on How To Remove Flex Super Glue.