Stick it to Storms Bundle

$79.99
$115.98
$79.99
Size: 12" x 10'
Color: Black

GET IT FAST! THIS ITEM QUALIFIES FOR EXPEDITED SHIPPING.

Prepare and repair this storm season with Flex Tape. Rip in the canopy? Flex Tape. Tear in your car or motorcycle cover? Flex Tape. Jacuzzi attacked by rogue branch? Flex Tape. Be ready this storm season with the Stick it to Storms Bundle.

This Discounted Bundle Includes Two Options

• (2) 12" x 10' Flex Tape or (2) 4" x 25' Flex Tape Max in ALL COLORS

Regular price: $115.98 (save up to 31%*)

This discounted bundle includes:

FLEX TAPE ® - Instantly patch, bond, seal virtually anything. It can be applied on dry or wet surfaces and it even works underwater!

*Savings based on price of buying bundle or kit components separately.

How To Use Flex Tape

1. CUT. Leave backing on tape and cut to desired dimension. Make sure to use a high quality utility knife with disposable blades or a razor blade when cutting.

2. PEEL. Remove the backing from the tape.

3. STICK. Apply tape to a clean surface and press down firmly.

4. SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.

*Flex Tape is a temporary, emergency repair and is not meant to be a permanent fix.

**Flex Tape may not bond to all hoses.

How To Use Flex Tape on Wet Surfaces or Underwater

For best results, when applying on wet surfaces or underwater, make sure the area being sealed is clean and free of any grease, oil, dirt, debris or algae. Only use on smooth, clean non-porous surfaces and applied at room temperature.

1. Keep the liner on and cut Flex tape to create a patch larger than the area being repaired. You can also round the corners of the patch to help prevent the corners from lifting.

2. Remove the liner and apply the Flex Tape firmly over the area being sealed. Once applied Flex Tape cannot be repositioned. For best results, apply Flex tape to both sides of the repair.

3. Press firmly using your fingers, squeegee, credit card, roller and continue pressing firmly starting at the center and working towards edges.

4. Make sure all water, air pockets, creases and folds have been completely removed. These are areas are where water could seep through and create a leak.

5. Continue pressing firmly for 1 minute or longer to allow Flex Tapes adhesive to completely bond to the surface being sealed.

May not adhere to certain surfaces such as siliconized or water-repellent materials. May cause damage to the surface if removed. Not intended for high pressure applications, such as garden hoses or engine repairs.

FLEX TIPS

For maximum adhesion on porous surfaces, using a standard blow dryer will help the adhesives bond with the surface.

Flex Tape’s bond will increase with time and pressure. Continued firm pressure will help increase adhesion.

Once fully bonded, Flex Tape cannot be repositioned.

Flex Tape adhesives may resist bonding to some plasticized or waterproof materials, siliconized, greasy, oily, dirty, or porous surfaces.

Certain fabrics such as canvas, nylon, polyester, synthetics, cotton and some other materials may need up to 24 hours to reach maximum hold.