Repairs & Product Info

Sometimes, even with all the preparation in the world, accidents happen. If you get Flex Seal spray on something you didn’t mean to or just need to take it off a surface, it can still be removed once applied.  If the Flex Seal is still wet, it can be removed with a dry cloth...

Flex Seal usually becomes dry to the touch within 2-3 hours and fully cured within 24-48 hours. If your Flex Seal still feels sticky or tacky after application, it may not be fully cured. Please note that dry times can vary due to temperature, humidity, and thickness of the coat. When applying Flex Seal,...

Looking for a sealant that lasts for the long haul? Flex Seal’s powerful, weather-resistant formula can stand up to rain, sleet, snow, and heat. It’s waterproof, UV-resistant, and once fully cured, can withstand temperatures from -20°F to 140°F. Use Flex Seal to fill small cracks and holes, for gutter repairs, general waterproofing, and more....

Whether you’re preparing your backyard for BBQ season or sealing up a leaky gutter, Flex Seal has you covered. This liquid rubber sealant is a good choice for outdoor projects because it is waterproof and UV-resistant. You can use Flex Seal to protect patio furniture, sheds, canoes, and so much more. Coat, seal, and...

Flex Tape is meant to be a temporary fix, so there may come a day when you need to remove it  to provide a more permanent solution. That’s when you’ll find that Flex Tape is hard to remove because its powerful, triple-thick adhesive gets even stronger over time. Luckily, Flex Adhesive Remover can help...

Yes, Flex Paste can stop water leaks. Flex Paste starts off as a thick paste and dries to a strong, flexible, waterproof barrier that can be applied to all types of surfaces to seal out air, water, and moisture. It can be applied on dry or wet surfaces, even underwater!

No. Once fully cured, Flex Super Glue is water resistant, but not waterproof. The application surface needs to be clean, dry, and free of oil or grease. Flex Super Glue should not be applied underwater. If you want a waterproof glue that can work underwater, use our original Flex Glue.

Make sure all surfaces are clean, dry, and free from dirt, grease, and oil. In a well-ventilated area, hold the Flex Shot can at a 45-degree angle, push on the nozzle, and apply directly to the area being treated. For a perfect bead, apply in a steady, even motion. Adjust your speed to control...

If Flex Paste gets on your skin, act fast and wipe with a clean, dry cloth. Do not use water to clean Flex Paste.

No, we do not recommend sanding Flex Seal. However, if the surface you’ll be applying Flex Seal to has rust on it, sanding that area before application can help with Flex Seal’s adhesion.