Materials
Tools Used:
• Clamp or tie
• Protective gloves
• Eyewear
IMPORTANT
Flood Paste in a Cartridge is the base coat for your first layer of protection. Use a gloved finger, Flex Gap Filler tool, or similar tool to push into all seams and openings to help create a watertight seal. Always be cautious of any sharp objects that may cause injury.
Storing Products
All remaining and/or unused Flood Protection products should be stored in a cool and dry environment. They should not be exposed to temperatures over 120 degrees. Below are some specific tips to help you prolong the life of your products:
FLEX PASTE® FLOOD PROTECTION
CARTRIDGE: Leave a small bead of Paste at the tip of the nozzle to create an airtight plug. Remove plug when ready to reuse.
SLEEVE: Fold the empty portion of packaging down to the remaining material and secure with a clamp or tie.
FLEX SEAL LIQUID® FLOOD PROTECTION
JAR: Replace and secure the lid tightly.
CAN: Replace the lid and use a rubber mallet to seal the can. If using a hammer, take special care not to damage the can.
FLEX TAPE® FLOOD PROTECTION
Simply place Tape in a sealed plastic storage bag.
FLEX SEAL® SPRAY FLOOD PROTECTION
After use and before storing, turn can upside down and spray a few seconds to clear the nozzle to prevent clogging. Do this outdoors.
For additional help, click on one of our how-to options below, or call us at:
833-4-A-FLOOD (833-423-5663).
Buy Now
