Inflatable Patch & Repair Kit Directions
Just Cut, Peel, Stick & Seal!
Prepare: Remove the air from the item being repaired. The surface must be clean, dry, and free from any grease, oil, or dirt before application.
Cut: Determine the size of the patch needed. Always use a patch large enough to cover beyond the tear or hole. Using a high-quality scissor or razor blade, cut to desired dimensions, leaving the backing on the tape.
Peel: Remove backing and apply to a clean, dry surface. Stick: Using your fingers, plastic squeegee, or roller, press firmly on the surface and remove any creases, air pockets, or folds that may have occurred. Continue pressing firmly and allow the patch to remain on the surface. Once bonded, the patch cannot be repositioned.
Seal: Now your inflatable is sealed and ready to fill.
Important: Not recommended for rough, textured, or velvet surfaces. For the initial application, do not apply to a wet surface.