FLEX SHOT® is available in black, white, clear and almond, 8 oz size.
Almond and white options are mildew resistant.
Includes free extension tube.
*Review count based on 5 star amazon.com reviews, collected between May 2020 and May 2021.
Make sure all surfaces is clean, dry, and free from dirt, grease, and oil. Use in a well-ventilated area. Hold can at a 45-degree angle, push on the nozzle and apply directly to the area being treated. Remove excess product with a dry paper towel. Tacky coating forms in about 20 minutes and will be dry to the touch. Flex Shot will be fully cured in 24 to 48 hours (depending on temperature and humidity).
For a perfect bead, apply in a steady, even motion. Adjust your speed to control the thickness of the bead. You can smooth Flex Shot out with your finger and work with the product as desired. If needed, make any adjustments immediately after the product is applied, before it starts to dry.
To repair a large hole, apply Flex Shot to the side of the hole that comes into direct contact with water.
It’s best to apply Flex Shot to a clean, dry surface. Still, Flex Shot can be applied to a wet surface, but just not in standing water.
Yes, but it is recommended that Flex Shot be used in a well-ventilated area.
No, Flex Shot will not fade, dry, crack, yellow or deteriorate due to contact with household cleaners.
Flex Shot will last up to 30 years and will not fade, dry, crack, yellow or deteriorate.
One can will cover up to forty (40) linear feet, depending on the thickness of the bead.
Flex Shot has not been tested for use on potable water systems.
Flex Shot is not recommended for use in extreme pressure.
Yes, extension tubes are reusable. After using Flex Shot with the extension tube, you can leave the extension tube affixed to the can of Flex Shot.
Yes, the extension tubes can be cut to any size in order to produce the desired bead thickness.
The extension tube screws on to the top of the Flex Shot can and is removed by unscrewing it in a counterclockwise direction. Do NOT attempt to remove the extension tube by pulling or yanking it off.