Auto/RV Repair Kit

Perfect for quick fixes on the road.

$9.99
$9.99
Color: Multicolor

Perfect for making quick fixes to cars, trucks, and RVs. It’s excellent for repairing upholstery rips and tears, bumpers, side panels, headlights, weather stripping, mirrors, knobs, trim molding, antennas, vents, and more.

This Discounted Kit Includes:

• 1 Flex Glue Mini, white, .75 oz. tube

• 1 Flex Tape Mini Clear, 3″ x 4″ patch

• 1 Flex Tape Mini, black, 3″ x 4″ patch

Regular price: $11.58 (save over 12%*)

FLEX TAPE® Mini - Instantly patch, bond, seal virtually anything. It can be applied on dry or wet surfaces and it even works underwater!

FLEX GLUE® Mini - The super strong, waterproof adhesive with amazing instant grab and hold. Can be applied on dry or wet surfaces, even underwater. Solvent-free, paintable, and no run and drip for overhead applications.

*Savings based on price of buying kit components separately.

*Flex Seal Kits may ship separately from other Flex Seal products.

 

How To Use Flex Tape

1. CUT. Leave backing on tape and cut to desired dimension. Make sure to use a high quality utility knife with disposable blades or a razor blade when cutting.

2. PEEL. Remove the backing from the tape.

3. STICK. Apply tape to a clean surface and press down firmly.

4. SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.

*Flex Tape is a temporary, emergency repair and is not meant to be a permanent fix.

**Flex Tape may not bond to all hoses.

How To Use Flex Tape on Wet Surfaces or Underwater

For best results, when applying on wet surfaces or underwater, make sure the area being sealed is clean and free of any grease, oil, dirt, debris or algae. Only use on smooth, clean non-porous surfaces and applied at room temperature.

1. Keep the liner on and cut Flex tape to create a patch larger than the area being repaired. You can also round the corners of the patch to help prevent the corners from lifting.

2. Remove the liner and apply the Flex Tape firmly over the area being sealed. Once applied Flex Tape cannot be repositioned. For best results, apply Flex tape to both sides of the repair.

3. Press firmly using your fingers, squeegee, credit card, roller and continue pressing firmly starting at the center and working towards edges.

4. Make sure all water, air pockets, creases and folds have been completely removed. These are areas are where water could seep through and create a leak.

5. Continue pressing firmly for 1 minute or longer to allow Flex Tapes adhesive to completely bond to the surface being sealed.

May not adhere to certain surfaces such as siliconized or water-repellent materials. May cause damage to the surface if removed. Not intended for high pressure applications, such as garden hoses or engine repairs.

FLEX TIPS

For maximum adhesion on porous surfaces, using a standard blow dryer will help the adhesives bond with the surface.

Flex Tape’s bond will increase with time and pressure. Continued firm pressure will help increase adhesion.

Once fully bonded, Flex Tape cannot be repositioned.

Flex Tape adhesives may resist bonding to some plasticized or waterproof materials, siliconized, greasy, oily, dirty, or porous surfaces.

Certain fabrics such as canvas, nylon, polyester, synthetics, cotton and some other materials may need up to 24 hours to reach maximum hold.

How To Use Flex Glue

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

Allow 24-48 hours for curing. Will reach maximum strength in 7 days.

FLEX GLUE® Pro Formula (Caulk Gun Cartridge)

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut off tip, leaving thread intact. Replace nozzle and cut nozzle to the desired length. Insert cartridge into a standard size caulking gun and squeeze trigger. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

In some applications, bracing may be required. If needed, you may reposition object within 10 minutes of application.

Fully cures in 12-24 hours and reaches maximum strength in 7 days.

After use, squeeze a small bead from the opening to form a plug. Simply cut the plug when you want to reuse.

WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.