¡OBTÉNLO RÁPIDO! ESTE ARTÍCULO CALIFICA PARA ENVÍO RÁPIDO.
CINTA FLEXIBLE®
CINTA IMPERMEABLE SUPER FUERTE
Adhesivo potente con un respaldo de goma grueso y flexible que se adapta prácticamente a cualquier forma y superficie, incluso bajo el agua. Se fortalece con el tiempo y la presión. Resistente a los rayos UV, libre de COV, soporta temperaturas y condiciones climáticas extremas.
• Reparaciones de plomería
• Sella el aire y el agua
• Reparaciones generales del hogar
• Soluciones rápidas en barcos, autos y casas rodantes
• Reparación de techos
• Reparación de piscinas
• Reparaciones de baño y ducha
• Proyectos de bricolaje, y más
Funciona en: PVC, acrílico, metal, acero, cobre, aluminio, madera, cerámica, porcelana, azulejos, vidrio, caucho, fibra de vidrio, estuco, yeso, piedra, cemento, hormigón, paneles de yeso, EPDM. techos, algunos plásticos, telas, vinilos y más.
CORTÉ ESTE BOTE A LA MITAD™ y lo reparé usando FLEX TAPE.
Múltiples tamaños disponibles: Grande 4" x 5', Jumbo 8" x 5', Gigante 12" x 10' y nuevo MAX 4" x 25' y MAX 8" x 25'.
Tamaños MAX disponibles en negro, blanco y transparente.
*El conteo de reseñas se basa en reseñas de 5 estrellas de amazon.com, recopiladas entre enero de 2017 y diciembre de 2023, y reseñas de 5 estrellas de Bazaarvoice de nuestros socios minoristas, recopiladas entre julio de 2019 y diciembre de 2023.
Ahorros del 23% y 40% basados en el precio por pie cuadrado, en comparación con nuestro rollo de 4" x 5'.
How To Use Flex Tape
1. CUT. Leave backing on tape and cut to desired dimension. Make sure to use a high quality utility knife with disposable blades or a razor blade when cutting.
2. PEEL. Remove the backing from the tape.
3. STICK. Apply tape to a clean surface and press down firmly.
4. SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.
*Flex Tape is a temporary, emergency repair and is not meant to be a permanent fix.
**Flex Tape may not bond to all hoses.
How To Use Flex Tape on Wet Surfaces or Underwater
For best results, when applying on wet surfaces or underwater, make sure the area being sealed is clean and free of any grease, oil, dirt, debris or algae. Only use on smooth, clean non-porous surfaces and applied at room temperature.
1. Keep the liner on and cut Flex tape to create a patch larger than the area being repaired. You can also round the corners of the patch to help prevent the corners from lifting.
2. Remove the liner and apply the Flex Tape firmly over the area being sealed. Once applied Flex Tape cannot be repositioned. For best results, apply Flex tape to both sides of the repair.
3. Press firmly using your fingers, squeegee, credit card, roller and continue pressing firmly starting at the center and working towards edges.
4. Make sure all water, air pockets, creases and folds have been completely removed. These are areas are where water could seep through and create a leak.
5. Continue pressing firmly for 1 minute or longer to allow Flex Tapes adhesive to completely bond to the surface being sealed.
May not adhere to certain surfaces such as siliconized or water-repellent materials. May cause damage to the surface if removed. Not intended for high pressure applications, such as garden hoses or engine repairs.
FLEX TIPS
For maximum adhesion on porous surfaces, using a standard blow dryer will help the adhesives bond with the surface.
Flex Tape’s bond will increase with time and pressure. Continued firm pressure will help increase adhesion.
Once fully bonded, Flex Tape cannot be repositioned.
Flex Tape adhesives may resist bonding to some plasticized or waterproof materials, siliconized, greasy, oily, dirty, or porous surfaces.
Certain fabrics such as canvas, nylon, polyester, synthetics, cotton and some other materials may need up to 24 hours to reach maximum hold.
