FLEX PASTE FLEX SEALFLEX SEAL LIQUIDFLEX TAPEFLEX SHOTNEW: FLEX SUPER GLUE

Flex Glue

OVER 1,300 FIVE STAR REVIEWS*

WATERPROOF ADHESIVE WITH INSTANT GRAB AND HOLD

Can be applied on dry or wet surfaces, even underwater. Solvent-free, paintable, and no run and drip for overhead applications. In squeeze tubes and cartridges. Available in white and crystal clear.

• Interior and exterior home repairs

• Seal out water and air

• Roof and siding repair

• Bath and shower fixes

• Shoe repair

• Furniture repairs

• DIY projects and hobbies

• Auto and boat repair

• RV and motor home repair

• Brick and stone bonding

Works on: Metals, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fiberglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and more.

Only
/ea
Flex Glue
No items found.

THAT’S ALOTTA DAMAGE®
Fix it with FLEX GLUE®.

Available in white and clear.

Available in 4 oz clear squeeze tube, 6 oz white squeeze tube, 9 oz clear cartridge, 10 oz white cartridge and 28 oz MAX cartridge.

Please note: a caulk gun is required to use Flex Glue cartridges.

WARNING: California Proposition 65 Notice.

*Review count based on 5 star amazon.com reviews, collected between February 2018 and October 2022, and 5 star Bazaarvoice reviews from our retail partners, collected between August 2019 and October 2022.

FLEX GLUE® Squeeze Tube

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

Allow 24-48 hours for curing. Will reach maximum strength in 7 days.

FLEX GLUE® Pro Formula (Caulk Gun Cartridge)

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut off tip, leaving thread intact. Replace nozzle and cut nozzle to the desired length. Insert cartridge into a standard size caulking gun and squeeze trigger. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

In some applications, bracing may be required. If needed, you may reposition object within 10 minutes of application.

Allow 24-48 hours for curing. Will reach maximum strength in 7 days.

After use, squeeze a small bead from the opening to form a plug. Simply cut the plug when you want to reuse.

WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.