Flex Glue Mini | flexsealproducts.com
FLEX PASTE FLEX SEALFLEX SEAL LIQUIDFLEX TAPEFLEX SHOTFLEX GLUE

Flex Glue Mini

OVER 1,100 FIVE STAR REVIEWS*

WATERPROOF ADHESIVE WITH INSTANT GRAB AND HOLD

Can be applied on dry or wet surfaces, even underwater. Solvent-free, paintable, and no run and drip for overhead applications. In squeeze tubes and cartridges. Available in white and crystal clear.

• Interior and exterior home repairs

• Seal out water and air

• Roof and siding repair

• Bath and shower fixes

• Shoe repair

• Furniture repairs

• DIY projects and hobbies

• Auto and boat repair

• RV and motor home repair

• Brick and stone bonding

Works on: Metals, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fiberglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and more.

Description
Directions
Videos
FAQs
Reviews

All of the strength of the original formula, now in a convenient mini size.

Available in 0.6 oz Clear or 0.75 oz White.

WARNING: California Proposition 65 Notice.

*Review count based on 5 star amazon.com reviews for all Flex Glue sizes, collected between May 2011 and May 2021.

FLEX GLUE® Squeeze Tube

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

Allow 24-48 hours for curing. Will reach maximum strength in 7 days.

FLEX GLUE™ Pro Formula (Caulk Gun Cartridge)

Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut off tip, leaving thread intact. Replace nozzle and cut nozzle to the desired length. Insert cartridge into a standard size caulking gun and squeeze trigger. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.

In some applications, bracing may be required. If needed, you may reposition object within 10 minutes of application.

Allow 24-48 hours for curing. Will reach maximum strength in 7 days.

After use, squeeze a small bead from the opening to form a plug. Simply cut the plug when you want to reuse.

WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.

Is Flex Glue part of the MAX Line?

Flex Glue is an easy to use, super strong, waterproof adhesive with amazing instant grab technology.
Now get 180% more for less, with Flex Glue MAX!

What size is Flex Glue MAX?

Get Flex Glue MAX in the oversized 28oz PRO Cartridge. Get more to do more for less with this Flex Glue Max.

Can Flex Glue be used underwater?

Yes, you can apply Flex Glue underwater and it will even cure underwater.

Can it be used as a sealant?

Flex Glue is an excellent sealant. It can fill large voids and is great for applications with uneven surfaces.

Can Flex Glue be painted?

Yes, once fully cured, it can be painted.

What is the difference between Flex Glue in the squeeze tube vs. the Pro Formula Cartridge?

All sizes have amazing instant grab technology and our Pro Formula has even more instant grab.

Can it be used on porous surfaces?

Yes, Flex Glue is designed to be super thick. It bonds to porous substrates such as brick, concrete, mortar and so much more.

Can I smooth or tool it once it has been applied?

Yes, Flex Glue can be tooled or re-positioned within 10 minutes of initial application. It will dry to the touch in 1 hour.

How long does it take for the product to fully cure?

Flex Glue fully cures in 24 – 48 hours and reaches a maximum strength in seven days.

In what temperatures can Flex Glue be applied?

For easy application, we recommend applying it in temperatures between 0°F – 150°F.

What temperatures can Flex Glue withstand?

Once applied, it can withstand a wide range of temperatures from -40°F up to 200°F.

How do I clean up after using Flex Glue before it cures?

Before it cures, Flex Glue can be cleaned with a dry cloth. If necessary, most residues can be removed with isopropyl alcohol.

Can I remove Flex Glue once it’s dry?

Once dried, Flex Glue can be removed with sharp tools similar to a chisel. However, it may not be possible to separate bonded materials without damaging the surfaces.

Can I use it on drinking water, rain barrels, fish tanks etc.?

Flex Glue has not been tested on potable water sources.

How do I clean up after using Flex Glue before it cures?

Before it cures, Flex Glue can be cleaned with a dry cloth. If necessary, most residues can be removed with isopropyl alcohol.

How many linear feet can I get out from a tube of Flex Glue?

Depending on the thickness of the bead, Flex Glue will provide the following:

MINI 0.75 oz. (white): up to 3.75 linear feet
4 oz. squeeze tube (clear): up to 20 linear feet
6 oz. squeeze tube (white): up to 30 linear feet
9 oz. Pro Formula (clear): up to 45 linear feet
10 oz. Pro Formula (white): up to 50 linear feet
28 oz. MAX (white): up to 140 linear feet

Will Flex Glue shrink during the curing process?

Flex Glue will not shrink, crack or peel.