How to apply Flex Shot

Make sure all surfaces are clean, dry, and free from dirt, grease, and oil.

In a well-ventilated area, hold the Flex Shot can at a 45-degree angle, push on the nozzle, and apply directly to the area being treated.

For a perfect bead, apply in a steady, even motion.

Adjust your speed to control the thickness of the bead.

You can smooth Flex Shot out with your finger and work with the product as desired. If needed, make any adjustments immediately after the product is applied, before it starts to dry. Remove excess product with a dry paper towel.

A tacky coating forms in about 20 minutes and will be dry to the touch. Flex Shot will be fully cured in 24 to 48 hours (depending on temperature and humidity).

Related Articles